| SERVICE BULLETIN LIST |
| | | | |
Doc. No. | Description | Rev. | Date | Downl. |
SB20-1 Mandatory | Installation of the Fuel Pipette | - | 1993-08-29 | N/A |
SB20-2 Mandatory | Flight & Maintenance Manual, Revision | - | 1993-09-20 | N/A |
SB20-3 Mandatory | Flight Manual, Revision | - | 1993-10-07 | N/A |
SB20-4 Mandatory | a) Airspeed indicator, markings b) FHB Revision | - | 1993-12-02 | N/A |
SB20-5/1 Mandatory | Import requirement for the USA | 1 | 1999-07-13 | N/A |
SB20-6/1 Mandatory | Import requirements for Canada | 1 | 1999-07-13 | N/A |
SB20-7/2 Mandatory | Exhaust muffler, cracks | 2 | 1994-09-08 | N/A |
SB20-8 Mandatory | Bending of the fuel tank ventilation line | - | 1994-04-25 | N/A |
SB20-9/3 Mandatory | Import requirement for the France | 3 | 2002-04-26 | 
|
SB20-10/2 Recommended | Possible retroactive technical modification | 2 | 1998-10-16 |
|
SB20-11/1 Recommended | Rotax 912A, TBO increase from 600 to 1000 hrs | 1 | 1994-12-15 | N/A |
SB20-12 Mandatory | Cable bracket attachment check | - | 1994-12-14 |
|
SB20-13/1 Mandatory | Improvement of shielding of the electronic ignition system | 1 | 1999-07-13 |
|
SB20-14/1 Mandatory | Ventilation- and drain bores | 1 | 1995-06-19 |
|
MSB20-15/2 | Revision status of airplane flight manual | 1 | 2002-10-15 | NEW |
SB20-16/1 Mandatory | Import requirements for Italy | 1 | 1999-07-13 |
|
SB20-17 Mandatory | Invalidation of German language Maintenance Manual | - | 1995-03-15 |
|
SB20-18 Mandatory | Elimination of 50 hour visual inspection | - | 1995-05-23 |
|
SB20-19 Mandatory | Inspection of the low pitch stop of the propeller | - | 1995-06-10 |
|
SB20-20 Mandatory | Exhaust system - fit of the exhaust manifolds | - | 1995-06-20 |
|
SB20-21 Recommended | Sealing of the connection aileron balance mass to aileron | - | 1995-06-28 |
|
SB20-22 Recommended | Optional installation of a sun protector inside the canopy | - | 1995-06-29 |
|
SB20-23 Mandatory | Nose landing gear - rubber spring assembly | - | 1995-07-07 |
|
SB20-24 Mandatory | Nose landing gear - rubber spring assembly, additional protection against rotation | - | 1995-09-11 |
|
SB20-25 Recommended | Wheel axle - special design | - | 1995-09-11 |
|
SB20-26/1 Mandatory | Airbox - retrofit of airbox of new design | 1 | 1999-07-13 |
|
MSB20-27/1
| Attachment bolts engine mount - fire wall | 1 | 2019-06-11 |
|
SB20-28 Recommended | Muffler - design change of endpipe | - | 1995-12-18 |
|
SB20-29 Recommended | Oil cooling - optional employment of a winterisation kit | - | 1995-12-18 |
|
SB20-30 Recommended | Modification of voltage regulation wiring of generator | - | 1996-03-25 |
|
SB20-31 Recommended | Modification of oil pressure sender installation | - | 1996-04-05 |
|
SB20-32 Mandatory | Nose wheel leg - check, exchange | - | 1996-04-05 |
|
SB20-33/1 Optional | Import requirements to Russia | 1 | 1999-07-13 |
|
SB20-34 Mandatory | Battery box fixture - replacement of fixture bolt | - | 1997-09-23 |
|
SB20-35/1 Optional | Propeller - optional installation of an MT-propeller type MTV-21-A/175-05 | 1 | 1999-07-13 |
|
SB20-36/1 Mandatory | Change of oil pressure limitations and operating ranges, exchange of oil pressure indicator | 1 | 1999-07-13 |
|
OSB20-037/1 | Power plant - possible retrofit installation of a Rotax 912 S3 engine | 1 | 2002-11-28 |
|
MSB20-38 | Placard for canopy locking mechanism | - | 2001-10-22 |
|
MSB20-39/1 | Canopy locking mechanism | 1 | 2001-11-30 |
|
MSB20-40 | Life limited engine comoponents | - | 2001-11-19 |
|
MSB20-41 | Rotax SB-912-030; Carburetor flange | - | 2002-03-07 |
|
OSB20-42 | Installation of a filter into the carburetor ventilation line | - | 2002-04-16 |
|
MSB20-043 | Temporary revision of the Airplane Flight Manual | - | 2002-12-20 |
|
MSB20-044/1 | Rotax SB-912-040R1; Dipstick | 1 | 2003-09-09 |
|
MSB20-045/1 | Revision status of the Airplane Maintenance Manual | 1 | 2022-06-29 | NEW |
MSB20-046 | Rotax SB-912-041; TBO increase | - | 2003-06-23 |
|
MSB20-047 | Alteration of Coolant to EVANS NPG+ | - | 2006-05-24 |
|
MSB20-048/15 | 6000 hours inspection | 15 | 2020-12-23
|
|
MSB20-049 | Canopy safety lock; incl. WI-MSB-20-049 Rev. 1
| - | 2005-07-12 |
|
MSB20-050/1 | Inspection of the Nose Landing Gear Damper and Installation of a Spacer or Change of the Elastomer Elements | 1 | 2007-07-26 | |
MSB20-054/1 | Installation of an alternative Trim Bowden Cable Bracket | 1 | 2009-09-07
|
|
OSB20-055/1 | Installation of alternative brake linesInstallation of alternative brake lines | 1 | 2011-03-01 | 
|
OSB20-057 | Activation of the Rotax Advanced Start System
| - | 2011-06-28 |
|
OSB20-058/2 | Installation of oil pressure sensor 956413
| 2 | 2013-10-18 |
|
RSB20-060/1 | Installation of new muffler D20-7806-10-00_()
| 1 | 2013-03-06 |
|
MSB20-061/1 | Replacement of the elevator bell crank assembly in the vertical stabilizer
| 1 | 2012-05-30 |
|
OSB20-062 | Installation of a cover plate instead of the unused ELT bracket
| - | 2013-11-27 |
|
OSB20-063 | Replacement of the steel main landing gear struts by aluminum main landing gear struts
| - | 2014-07-21 |
|
OSB20-064 | Replacement of the Tachodienst tachometer
| - | 2014-09-22 |
|
OSB20-066 | Replacement of cylinder head temperature indicator with coolant temperature indicator
| - | 2015-09-17 |
|
OSB20-067 | Installation of maintenance access holes in the elevator
| - | 2015-10-20 |
|
OSB20-068/1 | Use of mechanical fuel pumps with BRP part numbers 893110, 893114 or 893115 and description of the necessary airframe modifications at the first installation of these pumps
| 1 | 2016-05-31 |
|
OSB20-069 | Installation of a fuel pulsation damper between the mechanical fuel pump and the fuel manifold
| - | 2018-07-16 |
|
diamond-air.at |
