Service Informations

 

SERVICE INFORMATION LIST 

 

 

 

 

 

Doc. No. 

Description 

Rev. 

Date 

Downl. 

SI36-001/5

Descriptions of DAI technical publication systems and handling of documents

5

2024-04-19

SI36-003/2

Engine Mount - Exhaust bends - Crank Case 

2002-01-03


SI36-004/1

Canopy locking mechanism 

2002-05-25


SI36-005

Voltage regulator / rectifier 

2001-02-01


SI36-006

Rotax SB-912-022 & SB-914-011; Valve spring retainer 

2001-03-26


SI36-007

Rotax SB-912-032; Oil pump 

2002-03-04


SI36-008

Rotax SB-912-031; Mechanical fuel pump 

2002-03-06


SI36-009

Limbach SB No. 61; Modificated intake pipes 

2002-04-08


SI36-012

Fuel indication 

2002-06-10


SI36-029

Improvement of instructions given in the Airplane Flight Manual for oil check 

2004-03-17

SI36-030

Rotax ASB-912-045 & ASB-914-030; Oil filter inspection 

2004-10-19


SI36-031

DO NOT INSTALL DV20 Canopy safety lock

-

2005-08-02

SI36-065

EASA-AD 2011-0110: Air Brake Control System Torsion Tube – Test / Inspection / Protection / Replacement

-

2011-06-22

SI36-067

FAA-AD 2011-21-16: Air Brake Control System Torsion Tube – Test, repetitive inspections and if necessary replacement

-

2011-11-14

SI36-093/1

United Instruments Inc. Service Bulletin No. 12, Paint on dial may crack and separate from the surface

1

2013-10-31

SI36-100

United Instruments Inc. SB No. 13, Specific 5934 Series Altimeters manufactured between January 2015 and February 2016 are susceptible to develop a slow diaphragm leak which would affect the accuracy of the altimeters

-

2016-04-29

SI36-107

FAA-AD 2017-04-06: Certain altimeters displaying higher than actual altitude due to a slow diaphragm leak which were examined in United Instruments SB No. 13

-

2017-03-24

SI36-108

EASA-AD 2017-0220: inspection or replacement of propeller blades

-

2018-02-05

SI36-113/1

FAA-AD 2018-20-03 R1: Replacement of propeller blades regardless of the aircraft engine

-

2018-12-21

SI36-115

SLICK SB1-15A, Replacement of magnetos for several S/N

-

2019-01-10

SI36-120

Limbach TB 13.6, Inspection of the cylinder head valves or the replacement of the cylinder head if wear limits are exceeded

-

2019-11-22

SI36-121

SLICK SB1-15A, Inspection of magnetos for several S/N

-

2019-12-20

SI36-124

Limbach TB 20.4, Change of service intervals for SLICK-Magnetos

-

2022-06-15

SI36-125

United Instruments Service Note No. 5934-14, Replacement of nonconforming static port threads

-

2023-04-17