| SERVICE INFORMATION LIST |
| | | | |
Doc. No. | Description | Rev. | Date | Downl. |
SI40NG-001/1
| Descriptions of DAI technical publication systems and handling of documents | 1 | 2017-08-28
| 
|
SI40NG-002/1 | AE Mandatory Service Bulletin MSB-E4-009/2, Possible exchange of the engine high pressure pump | 1 | 2014-01-10 |
|
SI40NG-003 | EASA-EAD 2010-0206-E: High Pressure Fuel Pump - Inspection/Replacement | - | 2010-10-12 | 
|
SI40NG-005 | Garmin Service Advisory No. 1051 Rev. A, 2010 IGRF (International Geomagnetic Reference Field) Magnetic Field Model | - | 2011-02-10 |
|
SI40NG-006 | EASA-AD 2011-0039: High Pressure Fuel Pump - Inspection/Replacement | - | 2011-03-09 |
|
SI40NG-007/1 | Installation and tightening torque of worm drive clamps in the charge-air and liquid cooling system | 1 | 2013-01-18 |
|
SI40NG-008 | Garmin Service Advisory No. 1118 Rev. A, Momentary failure indications (Red-X) can occur when sorting stored flight plans | - | 2011-05-17 |
|
SI40NG-009 | Garmin Service Advisory No. 1129 Rev. A, Momentary loss of GRS 77/77H and GDC 74A/74B/74H functions | - | 2011-05-31 |
|
SI40NG-010 | Garmin Service Advisory No. 1029 Rev. D, European Geostationary Navigation Overlay System (EGNOS) Safety-of-Life (SoL) Service is Fully Operational | - | 2011-07-11 |
|
SI40NG-011 | Garmin Service Advisory No. 1141 Rev. A, Garmin SBAS-capable receivers may experience loss of LPV or LNAV/VNAV capability due to incoherent EGNOS satellite GEO ranging data | - | 2011-08-22 |
|
SI40NG-012/1 | AE Mandatory Service Bulletin Revision MSB-E4-013/1, Gearbox oil inspection - Additional oil check for early debris indication | 1 | 2011-08-22 |
|
SI40NG-013 | Measures that result from performing Austro Engine Mandatory Service Bulletin MSB-E4-013/1 | - | 2011-11-30 |
|
SI40NG-014 | Austro Engine Mandatory Service Bulletin MSB-E4-014/1, Replacement of the Fuel Return Line and Banjo Fitting | - | 2012-04-23 |
|
SI40NG-015 | Garmin Service Bulletin No. 1210 Rev. A, SafeTaxi® Availability In Europe | - | 2012-05-22 |
|
SI40NG-016 | AE Mandatory Service Bulletin Revision MSB-E4-014/2, Replacement of the Fuel Injector Return Line and the Banjo Fitting | - | 2012-06-18 |
|
SI40NG-017 | EASA-AD 2012-0180: Installation of a temporary placard in the cockpit | - | 2012-09-12 |
|
SI40NG-018 | Garmin Service Alert No. 1228, SIDs and STARs non-JETs Limitation | - | 2012-11-06 |
|
SI40NG-019 | Austro Engine Mandatory Service Bulletin No. MSB-E4-007/3, Replacement of Waste Gate Controller | - | 2012-12-11 |
|
SI40NG-020 | EASA-AD 2013-0018: Inspection, and replacement if necessary, of the charged air tubing from the turbocharger to the intercooler for chafing marks | - | 2013-01-22 |
|
SI40NG-021/1 | EASA-AD 2013-0020R3: Inspection of the markings of the safety belts
| 1 | 2014-04-08 |
|
SI40NG-022 | MT-Propeller Service Bulletin No. 27, Inspection and modification of certain governor type- and serial numbers | - | 2013-02-28 |
|
SI40NG-023 | Garmin Service Advisory No. 1309, Verification of displayed heading is not noticeable drifting prior Take-Off
| - | 2013-03-04 |
|
SI40NG-024 | EASA-AD 2013-0025: Replacement of certain Waste Gate Controller part numbers with an improved design at its E4 engines
| - | 2013-03-14 |
|
SI40NG-025 | Proper draining of the fuel system
| - | 2013-06-19 |
|
SI40NG-026 | Garmin Service Advisory No. 1309 Rev. B, Verification of displayed heading is not noticeable drifting prior Take-Off
| - | 2013-04-12 |
|
SI40NG-027 | EASA-AD 2013-0025R1: Alternative P/N waste gate controllers be installed as replacement parts, Austro Engine Mandatory Service Bulletin No. MSB-E4-007/4
| - | 2013-05-06 |
|
SI40NG-028 | FAA-AD 2013-08-21: Inspection and replacement if necessary of the charged air tubing from the turbocharger to the intercooler for chafing marks
| - | 2013-05-27 |
|
SI40NG-029 | Identification of stainless steel control cables
| - | 2013-06-17 |
|
SI40NG-030 | FAA-AD 2013-14-08: Replacement of certain Waste Gate Controller part numbers with an improved design
| - | 2013-07-22 |
|
SI40NG-031 | Garmin Service Advisory No. 1344 Rev. A, CDI / HSI scaling on a limited number of LPV and LNAV/VNAV approaches are incorrect
| - | 2013-08-21 |
|
SI40NG-032 | Garmin Service Advisory No. 1348 Rev. A, Approach waypoints are not properly loaded or displayed when using a vector transition at certain approaches
| - | 2013-08-21 |
|
SI40NG-033/1 | Austro Engine Mandatory Service Bulletin No. MSB-E4-007/5, Replacement of Waste Gate Controller
| 1 | 2013-09-20 |
|
SI40NG-034/1 | Garmin Terrain Data Alert No. 1351 Rev. B, Anomalies when using Synthetic Vision Technology in Northwest Greenland
| 1 | 2015-03-03 |
|
SI40NG-035 | EASA-AD 2013-0213: Austro Engine E4 Waste Gate Controller
| - | 2013-09-16 |
|
SI40NG-036/1 | United Instruments Inc. Service Bulletin No. 12, Paint on dial may crack and separate from the surface
| 1 | 2013-10-31 |
|
SI40NG-037 | Garmin Service Advisory No. 1352 Rev. A, Course deviation indicator (CDI) may deflect in the wrong direction in certain situations
| - | 2013-09-26 |
|
SI40NG-038 | Garmin Service Advisory No. 1363 Rev. A, User-modified terminal procedure stored in a Flight Plan may cause error condition
| - | 2013-11-21 |
|
SI40NG-039 | Garmin Service Advisory No. 1344 Rev. B, LPV and LNAV/VNAV Approach Full Scale Deflection
| - | 2013-12-18 |
|
SI40NG-040 | Garmin Service Advisory No. 1372 Rev. A, Unavailable RNAV (GPS) approaches due to lack of VDA
| - | 2013-12-18 |
|
SI40NG-041 | EASA-AD 2013-0213R1: Austro Engine E4 Waste Gate Controller
| - | 2014-03-03 |
|
SI40NG-042/1 | Andair GAS375 Gascolator Filters
| 1 | 2014-06-25 |
|
SI40NG-043 | FAA-AD 2014-08-10: Removing of certain Austro Engine part number (P/N) waste gate controllers from service
| - | 2014-05-07 |
|
SI40NG-044 | Austro Engine Mandatory Service Bulletin No. MSB-E4-017, Check and if necessary replacement of the Timing Chain
| - | 2014-07-03 |
|
SI40NG-045 | Garmin Service Advisory No. 1449 Rev. A, Unexpected flight paths may be displayed when sequencing to some vector transition approaches
| - | 2014-09-05 |
|
SI40NG-046 | Installation of charged air hose P/N D44-8122-00-10_2 | - | 2015-07-24 |
|
SI40NG-047 | Garmin Service Alert No. 1538 Rev. A, Operations with Altimeter Set to QFE (height above field elevation)
| - | 2015-08-12 |
|
SI40NG-048 | Andair Service Alert: Certain fuel valve systems with extension may have a possible lack of engagement between the universal joint assembly and the top of the valve assembly | - | 2015-09-17 |
|
SI40NG-050 | FAA-AD 2011-18-19: Austro Engine E4 Engines | - | 2016-03-04 |
|
SI40NG-051 | Austro Engine MSB-E4-020, Inspection of Gearbox Housing
| - | 2016-03-04 |
|
SI40NG-052 | United Instruments Inc. SB No. 13, Specific 5934 Series Altimeters manufactured between January 2015 and February 2016 are susceptible to develop a slow diaphragm leak which would affect the accuracy of the altimeters
| - | 2016-04-29 |
|
SI40NG-053 | Garmin Service Advisory No. 1372 Rev. B, unavailable RNAV (GPS) approaches
| - | 2016-06-24 |
|
SI40NG-054 | Garmin Service Advisory No. 1612 Rev. A, Update of the IGRF (International Geomagnetic Reference Field) Magnetic Field Model from base year 2010 to 2015
| - | 2016-09-19 |
|
SI40NG-055 | EASA-AD 2016-0190: Inspections of the auto pilot bridle clamps (see MSB 40NG-048-1)
| - | 2016-09-27 |
|
SI40NG-056 | EASA-AD 2016-0203: Repetitive visual inspections and, depending on findings, replacement of turbocharging-V-band Clamps with an improved design
| - | 2016-10-11 |
|
SI40NG-057/1 | Installation of turbo charge air system
| 1 | 2016-11-14 |
|
SI40NG-058 | FAA-AD 2016-22-06: Iinspections of the auto pilot bridle clamps in the pitch and roll control system
| - | 2016-11-02 |
|
SI40NG-059 | FAA-AD 2016-23-03: Repetitive visual inspections and, depending on findings, replacement of turbocharging-V-band Clamps
| - | 2016-11-15 |
|
SI40NG-060 | FAA-AD 2017-04-06: Certain altimeters displaying higher than actual altitude due to a slow diaphragm leak which were examined in United Instruments SB No. 13
| - | 2017-03-24 |
|
SI40NG-061 | Austro Engine MSB-E4-022/1, Replacement of certain batches of the Waste Gate Controller at E4 engines and the installation of a spring loaded circlip on all engines | - | 2017-11-13 |
|
SI40NG-062 | Austro Engine MSB-E4-024/1, Replacement of the standard circlip at the Waste Gate Controller at E4 engines with a spring loaded circlip
| - | 2017-11-13 |
|
SIDA40-002 | Change in Type Design Responsbility
| - | 2017-11-15 |
|
SI40NG-063 | EASA AD 2017-0250 & FAA AD 2018-07-16: MSB-E4-022 Rev. 2, introducing a lifetime limit to waste gate controller and replacement of waste gate rod circlips
| - | 2018-04-04 |
|
SI40NG-064 | EASA-AD 2018-0125: ATA 72 - Engine - Turbocharger Waste Gate Controller and Control Rod Circlip - Life Limit / Modification | - | 2018-06-14 |
|
SI40NG-065/2 | Air Intake System Hose | 2 | 2018-10-18 |
|
SI40NG-066 | Production Residue found in Air Filter | - | 2018-09-20 |
|
SI40NG-067 | Austro Engine MSB-E4-025 Fuel Injectors | - | 2018-10-22 |
|
SI40NG-068 | EASA AD 2019-0041: Life limit to Austro Engine timing chain and fuel injectors | - | 2019-03-08 |
|
SI40NG-069 | Governor Adjustment of MIN/MAX Stop Settings | - | 2019-06-20 |
|
SI40NG-070 | Fire Resistant Cowlings | - | 2019-10-03 |
|
SI40NG-071 | TCCA AD No. CF-2019-39: Fuel tank interconnect hose replacement | - | 2020-02-20 |
|
SI40NG-074 | DUPONT product discontinuation letter | - | 2020-05-20 |
|
SI40NG-075 | Aircraft cleaning and disinfection recommendations | - | 2020-05-21 |
|
SI40NG-077 | FAA AD 2020-22-14: Replacement of the wastegate controller and control rod circlip | - | 2021-01-01 |
|
SI40NG-078 | EASA AD 2021-0055-E and Austro Engine MSB-E4-030 - Oil pump replacement | - | 2021-02-25 |
|
SI40NG-079 | EASA AD 2021-0550-E and Austro Engine MSB-E4-030 Rev. 3 - Oil Pump Replacement - updated serial number effectivity | - | 2021-03-18 |
|
SI40NG-080 | EASA AD 2021-0143-E and Austro Engine MSB-E4-031 - Oil pump replacement | - | 2021-06-16 |
|
SI40NG-081 | Austro Engine MSB-E4-034/2, MSB-E4-035, and EASA AD 2021-0203-E | - | 2021-09-23 |
|
SI40NG-082 | HPP Gear Modification | - | 2021-09-30 |
|
SI40NG-083 | Austro Engine MSB-E4-036 and EASA AD 2021-0274-E | - | 2021-12-16 |
|
SI40NG-084 | Nose landing gear maintenance and inspections | - | 2023-01-12 |
|
SI40NG-085 | Austro Engine MSB-E4-039 - Oil analysis and piston replacement | - | 2022-11-17 |
|
SI40NG-087 | Garmin Service Advisory No. 22106 Rev. A - G1000 NXi Systems Database Update | - | 2022-12-06 |
|
SI40NG-089 | United Instruments Service Note No. 14 | - | 2023-04-06 |
|
SI40NG-090 | Service Information Letter to introduce Austro Engine MSB-E4-042_r0 | - | 2024-02-07 |
|
SI40NG-094 | Closing and latching the passenger door | - | 2024-08-30 |
|
SI40NG-095 | EASA Emergency Airworthiness Directive No. 2024-0172-E, piston inspection or replacement, having the Part Number E4A-72-400-000 | - | 2024-08-29 |
|
diamond-air.at |
